Please make sure the input voltage, output voltage and current in item specs when placing orders. Or we\\\'ll arrange the one as the item specs says.
Product Description MODEL MDR-10-5 MDR-10-12 MDR-10-15 MDR-10-24 OUTPUT DC VOLTAGE 5V 12V 15V 24V RATED CURRENT 2A 0.84A 0.67A 0.42A CURRENT RANGE 0~2A 0-0.84A 0-0.67A 0-0.42A RATED POWER 10W 10W 10W 10W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p VOLTAGE TOLERANCE Note.3 5.0% 3.0% 3.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 5.0% 3.0% 3.0% 2.0% SETUP, RISE TIME Note.5 500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 120ms/230VAC 25ms/115VAC at full load INPUT VOLTAGE RANGE 85 ~ 264VAC 120-370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 77% 81% 81% 84% AC CURRENT (Typ.) 0.33A/115VAC 0.21A/230VAC INRUSH CURRENT (Typ.) COLD START 35A/115VAC 70A/230VAC LEAKAGE CURRENT PROTECTION OVERLOAD Above 105% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed OVERVOLTAGE 5.75-6.75V 13.8-16.2V 17.25-20.25V 27.6-32.4V Protection type: Shut down o/p voltage, re-power on to recover FUNCTION DC OK ACTIVE SIGNAL (max.) 3.75 ~6V/ 50mA 9 - 13.5V/40mA 11.5-16.5V/40mA 18-27V/20mA ENVIRONMENT WORKING TEMP. -20 ~ +70C (Refer to "Derating Curve") WORKING HUMIDITY 20 - 90% RH non-condensing STORAGE TEMP., HUMIDITY -40 ~ +85C ,10- 95% RH TEMP. COEFFICIENT 0.03%/C (0 - 50C) VIBRATION Component: 10 - 500Hz, 2G10min./1 cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 SAFETY &EMC (Note 4) SAFETY STANDARDS UL508, TUV EN60950-1 approved WITHSTAND VOLTAGE l/P-0/P:3KVAC l/P-FG:2KVAC 0/P-FG:0.5KVAC ISOLATION RESISTANCE l/P-O/P, l/P-FG, 0/P-FG:100M Ohms/500VDC/25C/70% RH EMC EMISSION Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2.-3 EMC IMMUNITY Compliance to EN610004-2,3,4,5,6,8,11, EN55024.EN61000-6-1 ,EN61204-3, light industry level, criteria A OTHERS MTBF 584Khrsmin. MIL-HDBK-217F (25C) DIMENSION 22.5*90*100mm (W*H*D) PACKING 0.17Kg; 72pcs/13.2Kg/0.91CUFT NOTE 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3.Tolerance : includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.